Constant Temperature-Humidity Chamber TH-150

For electronic, electrical, material and component samples, to establish temperature and humidity conditions for environmental evaluation under steady or programmed conditions. Circuits and fixtures are selected for the sample and required tests.

Technical Specifications
Temperature Range	−40 °C to 150 °C
Humidity Range	30% to 98% RH
Temperature Fluctuation	±0.5 °C
Inner Chamber Dimensions	500 × 600 × 500 mm
Working Chamber Volume	150 L
Program Control	99 segments, freely editable
Interface	RS485 / Ethernet

Product Overview

Application and test scope

Constant Temperature-Humidity Chamber TH-150 is intended for electronic, electrical, material and component samples. It is used to establish temperature and humidity conditions for environmental evaluation under steady or programmed conditions. The test arrangement is selected around the sample construction, service conditions and required evaluation method.

Tests and configuration

Soak tests at steady temperature and humidity
Temperature and humidity changes with hold stages defined by the programme
Condition records and sample-state checks during testing

Typical test workflow

Arrange samples according to their dimensions and placement requirements, set the temperature and humidity programme and specify hold times. Record conditions and, where needed, compare functional checks before and after exposure.

Selection information

For a suitable proposal, provide sample dimensions, quantity, heat dissipation, temperature-humidity combinations, hold times, wiring or powered-test requirements and installation conditions. Product drawings or a sample help define connections, locating tooling and test circuits.

Measurement ranges, accuracy, automation, data interfaces and acceptance criteria are defined by the selected configuration and agreed technical proposal.

Constant Temperature-Humidity Chamber TH-150